All Products
-
Cold Rolled Stainless Steel Sheets
-
Hot Rolled Stainless Steel Sheets
-
Stainless Steel Round Pipe
-
Stainless Steel Coil Strip
-
Stainless Steel Wire Mesh
-
Stainless Steel Bar
-
Metal Forging Process
-
High Temperature Alloy
-
Corrosion Resisting Alloy
-
Super Austenitic Stainless Steel
-
Incoloy Alloy
-
Nickel Base Alloy
-
Precision Alloy
-
Monel Metal Alloy
-
Hastelloy Material
-
Inconel Special Metals
-
Titanium Alloy Material
-
Resistance Electrothermal Alloy
Keywords [ alloy steel corrosion ] match 71 products.
Inconel Special Metals Corrosion-Resistant Alloy with Good Formability & Excellent Oxidation Resistance
| Ductility: | Good |
|---|---|
| Strength: | High |
| Weldability: | Good |
Good Flexibility Good Toughness Good Formability Corrosion-Resistant Alloy
| Heat Resistance: | Excellent |
|---|---|
| Ductility: | Good |
| Weldability: | Good |
Monel Alloy Copper-Nickel Alloy with Good Weldability & Excellent Corrosion Resistance
| Corrosion Resistance: | Excellent |
|---|---|
| Melting Point: | 1350-1400°C |
| Thermal Conductivity: | 20-25 W/m-K |
High Tensile Strength 550MPa Alloy with Excellent Oxidation Resistance
| Thermal Expansion: | 11.2×10-6/K |
|---|---|
| Formability: | Good |
| Composition: | Nickel-Chromium-Iron |
Nickel Alloy Alloyed with Creep Strength ≥200 MPa Modulus of Elasticity 200 GPa and Electrical Resistivity ≤0.1 μΩ·m
| Hardness: | ≤200 HB |
|---|---|
| Melting Point: | 1446℃ |
| Alloy: | Nickel Base Alloy |
High Melting Point 1400 - 1450 °C Precision Alloy with 10% Elongation
| Corrosion Resistance: | Good |
|---|---|
| Hardness: | ≤HB220 |
| Thermal Conductivity: | ≤50 W/m-K |
304L 301 12x 12 stainless steel alloy plate/sheet 30mm Thick
| Name: | Cold Rolled Stainless Steel Sheet |
|---|---|
| Type: | Cold Rolled |
| Standard: | ASTM JIS AISI GB DIN EN |
High Yield Strength Nickel-Chromium-Iron Alloy for High Temperature Performance
| Corrosion Resistance: | Excellent |
|---|---|
| Melting Point: | 1400-1450℃ |
| Elongation: | ≥25% |
High Quality Thermal Expansion 11.2×10-6/K Steel with Good Weldability and Excellent Corrosion Resistance
| Density: | 8.2g/cm3 |
|---|---|
| Tensile Strength: | ≥550MPa |
| Machinability: | Good |
High Tensile Strength 550MPa Alloy with Good Weldability and 8.2g/cm3 Density
| Hardness: | ≤200HB |
|---|---|
| Melting Point: | 1400-1450℃ |
| Composition: | Nickel-Chromium-Iron |