All Products
-
Cold Rolled Stainless Steel Sheets
-
Hot Rolled Stainless Steel Sheets
-
Stainless Steel Round Pipe
-
Stainless Steel Coil Strip
-
Stainless Steel Wire Mesh
-
Stainless Steel Bar
-
Metal Forging Process
-
High Temperature Alloy
-
Corrosion Resisting Alloy
-
Super Austenitic Stainless Steel
-
Incoloy Alloy
-
Nickel Base Alloy
-
Precision Alloy
-
Monel Metal Alloy
-
Hastelloy Material
-
Inconel Special Metals
-
Titanium Alloy Material
-
Resistance Electrothermal Alloy
Keywords [ alloy steel corrosion ] match 71 products.
Monel Metal Alloy Up To 830 MPa Tensile Strength 13.2 μm/m-K Thermal Expansion
| Tensile Strength: | Up To 830 MPa |
|---|---|
| Electrical Resistivity: | 1.1 μΩ-cm |
| Machinability: | Good |
High Tensile Strength Precision Alloy with Thermal Conductivity ≤50 W/m-K
| Type: | Alloy |
|---|---|
| Corrosion Resistance: | Good |
| Heat Treatment: | Annealing |
High Temperature Alloy with Excellent Corrosion Resistance and Good Weldability
| Machinability: | Good |
|---|---|
| Oxidation Resistance: | Excellent |
| Corrosion Resistance: | Excellent |
Monel Metal Alloy With Thermal Expansion 13.2μm/m-K & Tensile Strength Up To 830MPa
| Hardness: | Up To 200 HB |
|---|---|
| Melting Point: | 1350-1400°C |
| Yield Strength: | Up To 550 MPa |
Monel Alloy with Good Machinability Tensile Strength up to 830 MPa & Elongation up to 30%
| Melting Point: | 1350-1400°C |
|---|---|
| Chemical Composition: | Copper-Nickel Alloy |
| Name: | Monel Metal Alloy |
Monel Metal Alloyed with 30% Elongation & 20-25 W/m-K Thermal Conductivity
| Elongation: | Up To 30% |
|---|---|
| Name: | Monel Metal Alloy |
| Machinability: | Good |
ASTM 316 Stainless Steel Sheet Acid Resistance Ss Sheet Metal
| Name: | High Quality Hot Rolled Astm Stainless Steel Sheet And Plates 0.6mm Thick Stainless Steel Plate |
|---|---|
| Material Level: | 201, 301, 304, 304L, 316, 316L,409,410,430,904 |
| Standard: | ASME、ASTM、BS、GB、DIN、JIS |
High Formability 400MPa Yield Strength Alloy
| Machinability: | Good |
|---|---|
| Density: | 8.2g/cm3 |
| Melting Point: | 1400-1450℃ |
Nickel-Chromium-Iron High Temperature Steel 8.2g/cm3 Density
| Name: | High Temperature Alloy |
|---|---|
| Yield Strength: | ≥400MPa |
| Tensile Strength: | ≥550MPa |
High Yield Strength 680 MPa Polished Steel Alloy for Melting Point 1400-1450°C
| Type: | Alloy |
|---|---|
| Density: | 7.8 - 8.0 G/cm3 |
| Melting Point: | 1400 - 1450 °C |