All Products
-
Cold Rolled Stainless Steel Sheets
-
Hot Rolled Stainless Steel Sheets
-
Stainless Steel Round Pipe
-
Stainless Steel Coil Strip
-
Stainless Steel Wire Mesh
-
Stainless Steel Bar
-
Metal Forging Process
-
High Temperature Alloy
-
Corrosion Resisting Alloy
-
Super Austenitic Stainless Steel
-
Incoloy Alloy
-
Nickel Base Alloy
-
Precision Alloy
-
Monel Metal Alloy
-
Hastelloy Material
-
Inconel Special Metals
-
Titanium Alloy Material
-
Resistance Electrothermal Alloy
Keywords [ high density titanium alloy ingredient ] match 9 products.
High Density Titanium Alloy Ingredient With High Strength-To-Weight Ratio
| Tensile Strength: | 895 MPa |
|---|---|
| Strength-to-Weight Ratio: | High |
| Chemical Composition: | Ti-6Al-4V |
High Strength Titanium Alloy Material 4.43 G/Cm3 1660°C Melting Point
| Melting Point: | 1660°C |
|---|---|
| Hardness: | 35 HRC |
| Density: | 4.43 G/cm3 |
4.9μΩ-M Titanium Alloy Material 35 HRC For Electrical Resistivity
| Strength-to-Weight Ratio: | High |
|---|---|
| Melting Point: | 1660°C |
| Coefficient Of Thermal Expansion: | 8.6 μm/m-K |
Density 4.43 G/Cm3 Titanium Alloy Material Ti-6Al-4V Thermal Conductivity 21.9 W/M-K
| Hardness: | 35 HRC |
|---|---|
| Yield Strength: | 828 MPa |
| Name: | Titanium Alloy Material |
High Strength Titanium Alloy Material with 35 HRC Hardness & High Weight-to-Strength Ratio
| Thermal Conductivity: | 21.9 W/m-K |
|---|---|
| Strength-to-Weight Ratio: | High |
| Corrosion Resistance: | Excellent |
Titanium Alloy Element with Thermal Conductivity 21.9 W/m-K Tensile Strength 895 MPa and Coefficient of Thermal Expansion 8.6 μm/m-K
| Specific Heat Capacity: | 0.523 J/g-K |
|---|---|
| Strength-to-Weight Ratio: | High |
| Elongation: | 13% |
Titanium Alloy Element with 8.6 μm/m-K CTE 4.43 G/cm3 Density & 895 MPa Tensile Strength
| Specific Heat Capacity: | 0.523 J/g-K |
|---|---|
| Density: | 4.43 G/cm3 |
| Tensile Strength: | 895 MPa |
High Tensile Strength 895 MPa Titanium Alloy Element with Hardness 35 HRC and Elongation 13%
| Hardness: | 35 HRC |
|---|---|
| Tensile Strength: | 895 MPa |
| Corrosion Resistance: | Excellent |
Ti-6Al-4V Alloy Element with Chemical Composition and Melting Point of 1660°C
| Yield Strength: | 828 MPa |
|---|---|
| Modulus Of Elasticity: | 105 GPa |
| Name: | Titanium Alloy Material |
1